If you’re struggling with a faulty ignition lock cylinder, you may experience difficulty turning your key, starting your vehicle, or even removing the key. Knowing how to change the ignition lock cylinder can save you money and time while ensuring your car stays operational. This guide will take you through a detailed, step-by-step process to replace your ignition lock cylinder efficiently.
Why Change the Ignition Lock Cylinder?
Your vehicle’s ignition lock cylinder is an essential part of the ignition system, allowing you to start your engine with a key. Over time, the lock cylinder may wear out, leading to issues such as:
- Difficulty inserting or turning the key.
- Key getting stuck in the ignition.
- Inability to start the vehicle.
- Ignition switch malfunctioning.
When these issues arise, it’s crucial to replace the faulty ignition lock cylinder to prevent unexpected breakdowns.
Tools and Materials Needed
Before starting the process, gather the necessary tools and materials to ensure a smooth ignition replacement.
Essential Tools:
- Ignition lock cylinder removal tool
- Screwdrivers (flathead and Phillips)
- Socket wrench set
- Pliers
Replacement Parts:
- New ignition lock cylinder with keys
- Lock cylinder and key set (if applicable)
Safety Gear:
- Gloves
- Safety glasses
Professional Ignition Repair and Replacement
Step-by-Step Guide: How to Change the Ignition Lock Cylinder
1: Prepare for the Replacement
- Disconnect the Battery: Locate your vehicle’s battery and disconnect the negative terminal to prevent electrical hazards.
- Ensure the Vehicle is in Park or Neutral: This prevents accidental movement while working on the ignition.
- Consult Your Vehicle’s Manual: Each vehicle model may have specific steps, so refer to the manual for precise guidance.
2: Access the Ignition Lock Cylinder
- Remove the Steering Column Cover:
-
- Locate the screws securing the plastic cover around the steering column.
- Use a screwdriver to remove the screws and carefully detach the cover.
- Locate the Ignition Lock Cylinder:
- The lock cylinder is usually positioned behind the ignition switch inside the steering column.
3: Remove the Old Ignition Lock Cylinder
Insert the Key and Turn to the Accessory Position: Some vehicles require the key to be in a specific position to release the cylinder.
Use the Ignition Lock Cylinder Removal Tool:
- Insert the tool into the pinhole near the cylinder.
- Press the retaining pin while gently pulling out the old lock cylinder.
Disconnect the Electrical Wiring: Some ignition cylinders have electrical connectors. Unplug them carefully to avoid damage.
4: Install the New Ignition Lock Cylinder
Align the New Cylinder:
- Ensure the new lock cylinder aligns with the ignition slot.
- Insert the lock cylinder and key carefully.
Secure the Cylinder in Place:
- Push the new ignition lock cylinder into the slot until it clicks into position.
- Reconnect any electrical connectors.
5: Reassemble and Test the New Cylinder
Reattach the Steering Column Cover: Secure it back using the screws removed earlier.
Reconnect the Battery: Reattach the negative terminal to restore power.
Test the Ignition System:
- Insert the new key and turn it to different positions (Accessory, Start, and Off).
- Ensure the ignition functions smoothly without resistance.
6: Programming the New Key (If Needed)
- Some vehicles require key programming to match the new auto ignition lock cylinder.
- Follow your vehicle manufacturer’s guidelines to program the key correctly.
Troubleshooting Common Issues
Key Doesn’t Turn in the New Cylinder:
- Ensure the lock cylinder is fully inserted.
- Check for debris inside the ignition slot.
Ignition Switch Not Functioning Properly:
- Verify electrical connections.
- If necessary, consider how to replace the ignition switch entirely.
Cylinder Not Fitting Correctly:
- Make sure you have the correct replacement part for your vehicle model.
- Inspect for obstructions in the ignition housing.
Cost of Replacing Ignition Lock Cylinder
The cost of replacing the ignition lock cylinder varies depending on the vehicle make and model. Here’s a breakdown:
- DIY Replacement: $50 – $200 (cost of parts).
- Professional Replacement: $200 – $500 (including labor costs).
Maintenance Tips for Your Ignition Lock Cylinder
- Regular Lubrication: Apply graphite lubricant to ensure smooth key movement.
- Avoid Excessive Force: Never force the key; this can damage internal components.
- Periodic Inspections: Check for wear and replace the cylinder before it completely fails.
When to Seek Professional Help
While DIY replacement is possible, there are situations where professional assistance is recommended:
- Complex Issues: If the ignition is severely damaged.
- Lack of Proper Tools: Specialized tools may be required.
- Warranty Concerns: Professional service prevents voiding warranties.
Need Help? Contact Astoria Locksmith and Door Inc.
If you’re unsure about replacing your ignition lock cylinder, our experts at Astoria Locksmith and Door Inc. are ready to assist. We offer professional ignition replacement services in Astoria, NY 11106. Call us at (718) 440-9204 for quick and reliable service.
👉 Cylinder Change Master Key Systems
👉 Car Keys And Lockouts
Frequently Asked Questions
Q1. How to remove an ignition lock cylinder?
To remove an ignition lock cylinder, insert the key, turn it to the accessory position, and use a ignition lock cylinder removal tool to press the release pin. Gently slide the old cylinder out.
Q2. How to fix an ignition switch?
If the ignition switch is faulty, check the wiring, replace worn-out keys, or consider how to replace ignition switch by removing the old unit and installing a new one.
Q3. What is the cost of replacing an ignition lock cylinder?
The cost of replacing ignition lock cylinder varies by car model but typically ranges between $100 and $300, including parts and labor.
Q4. Do I need new keys after ignition replacement?
Yes, if you install a new ignition lock cylinder with keys, you’ll need to reprogram or cut new keys to match the vehicle’s security system.
